Question 243 marksShort AnswerSection C

Figure shows a narrow beam of electrons entering with a velocity of 3×1073 \times 10^7 m/s, symmetrically through the space between two parallel horizontal plates P1P1′P_1 P_1' and P2P2′P_2 P_2' kept 2 cm apart. If each plate is 3 cm long, calculate the potential difference V applied between the plates so that the beam just strikes the end P2′P_2'.

Narrow electron beam deflected between two parallel horizontal plates
Electric Charges and Fields
Deflection of an electron beam in a uniform electric field

Official answer

Data & setup


  • Entry speed (horizontal) v=3×107v = 3 \times 10^7 m/s; plate length l=3 cm=0.03 ml = 3\text{ cm} = 0.03\text{ m}; separation d=2 cm=0.02 md = 2\text{ cm} = 0.02\text{ m}.
  • Entering midway, the beam must deflect y=d/2=0.01y = d/2 = 0.01 m to just hit end P2′P_2'.
  • m=9.1×10−31m = 9.1 \times 10^{-31} kg, e=1.6×10−19e = 1.6 \times 10^{-19} C.

Motion (like a projectile)


  • Time between plates: t=l/v=0.03/(3×107)=1×10−9t = l/v = 0.03 / (3 \times 10^7) = 1 \times 10^{-9} s.
  • Vertical acceleration: a=eE/m=eV/(md)a = eE/m = eV/(m d).
  • Deflection: y=12at2=12⋅eV/(md)⋅t2=d/2y = \frac{1}{2} a t^2 = \frac{1}{2} \cdot eV/(md) \cdot t^2 = d/2.

Solve for V


V=md2/(et2)=(9.1×10−31×(0.02)2)/(1.6×10−19×(10−9)2)V = m d^2 / (e t^2) = (9.1 \times 10^{-31} \times (0.02)^2) / (1.6 \times 10^{-19} \times (10^{-9})^2)


V≈2.28×103V \approx 2.28 \times 10^3 V ≈2275\approx 2275 V

Answer keywords:electron deflectionparallel platesuniform electric fieldprojectile motiontransit time l/vy = d/2V = m d^2/(e t^2)2275 V

Marking scheme

  1. 1.1 mark: recognising projectile motion — t=l/vt = l/v and required deflection y=d/2y = d/2.
  2. 2.1 mark: correct equation 12⋅(eV/md)⋅t2=d/2\frac{1}{2}\cdot(eV/md)\cdot t^2 = d/2 leading to V=md2/(et2)V = m d^2/(e t^2).
  3. 3.1 mark: correct substitution and final value V≈2275V \approx 2275 V (≈2.28×103\approx 2.28 \times 10^3 V).

Hint

It is projectile motion: t=l/vt = l/v horizontally, and vertical drop y=12(eV/md)t2y = \frac{1}{2}(eV/md)t^2 must equal d/2d/2 (beam enters at the centre).

Quick oral answer

The electron crosses the 3 cm plates in a nanosecond while the field pulls it sideways like a projectile; setting the 12at2\frac{1}{2}at^2 drop equal to half the 2 cm gap gives V=md2/et2≈2275V = m d^2/e t^2 \approx 2275 volts.

Common mistakes

  1. 1.Taking the required deflection as the full gap dd instead of d/2d/2, because the beam enters symmetrically (midway) — this doubles the voltage.
  2. 2.Forgetting to convert cm to metres, giving answers off by powers of ten.
  3. 3.Using the plate separation instead of the plate length to find the transit time t=l/vt = l/v.

Analysis and explanation

Concept


Inside parallel plates the field is uniform, so a charged particle moves exactly like a horizontal projectile: constant horizontal velocity and constant vertical acceleration a=eE/ma = eE/m. This is the working principle of a cathode-ray oscilloscope deflection system.


Key modelling choices


  • The beam enters midway, so 'just striking the far end P2′P_2'' means the vertical drop equals half the gap, y=d/2=1y = d/2 = 1 cm.
  • The horizontal length l fixes the transit time t=l/vt = l/v; the field acts only during this time.

Exam trap


  • Using y=dy = d (full gap) instead of y=d/2y = d/2 doubles the answer — remember the beam starts at the centre.
  • Mixing cm and m; keep everything in SI. Watch that t2=10−18 s2t^2 = 10^{-18}\ \text{s}^2, a very small number.

Real-world link


Exactly this deflection physics steered the electron beam in old CRT televisions and oscilloscopes; the same E-field-vs-transit-time balance governs ink-jet printer droplet steering and mass-spectrometer beam control.

Interesting facts

This is precisely how a cathode-ray oscilloscope works: a voltage on the deflecting plates steers the electron beam, and because electrons are so light they respond within nanoseconds.

In J. J. Thomson's 1897 experiment the very same plate-deflection geometry, combined with a magnetic field, first yielded the electron's charge-to-mass ratio e/m.

Question details

Q24 of 39 questions

Board
CBSE
Class
Class 12
Subject
Physics
Year
2026
Section
Section C
Marks
3
Type
Short Answer
Chapter
Electric Charges and Fields
Topic
Deflection of an electron beam in a uniform electric field
Bloom's level
apply
Syllabus topic
Unit I: Electric Charges and Fields — Motion of a charged particle in a uniform electric field (parallel-plate deflection)
Author
CBSE
Reviewed by
Padhantu Academic Team

Spotted a mistake or something unclear?

Tell us and we will fix it.

Frequently asked questions

Why is the required vertical deflection d/2d/2 and not dd?

The beam enters exactly midway between the plates (symmetrically). To 'just strike the far end P2′P_2'' — the edge of the lower plate — it needs to drop only half the plate separation, i.e. y=d/2=1y = d/2 = 1 cm, not the full 2 cm gap.

Does the electron's entry speed appear in the final formula?

Yes, through the transit time. A faster electron spends less time (t=l/vt = l/v) in the field, so it deflects less; to still hit the end you would need a larger voltage. Here v=3×107v = 3\times10^7 m/s gives t=1t = 1 ns and V≈2275V \approx 2275 V.